Filter
Top Products
CV-M10BX/CV-M10RS
- 3 -
5. Pin Assignment
5-1. 12-pin Multi-connector (DC-IN/SYNC.)
Type: HR10A-10R-12PB-01 (Hirose) male seen from rear.
Notes: *1) Signals on pin no. 6, 7 and 9 can be changed by jumper setting.
See "8. Jumper Settings" for more information.
*2)In Edge Pre-select and Pulse Width Control mode do not input ext. VD signal.
5.2. 6-pin Multi-connector (RS 232C/TRIGGER)
Type: HR10A-7R-6PB (Hirose) male seen from rear.
Note: WEN is generated in Normal Trig, Random Trig (normal and high speed
shutter) and Low Speed Shutter. It is 1 H long and indicates the beginning
of video read out.