Filter
Top Products
Page 5
TM-1020 Series Progressive Scan Shutter Cameras
Installation
2 Installation
The following instructions are provided to help you to set up your camera quickly and easily. We
suggest that you read through these instructions before you unpack and set up your camera system.
2.1 Getting Started
2.1.1 Unpacking Instructions
We recommend that you save the original packing cartons for the cameras and accessories in case you
need to return or exchange an item.
We also recommend that you bench-test any equipment being sent to another location for field
installation to assure that everything is fully operational as a system.
2.1.2 Components List
Please begin by checking your order against the Components List shown below to assure that you have
received everything as ordered, and that nothing has been overlooked in the packing materials. If any
item is missing, please contact your JAI, Inc. representative immediately.
• TM-1020 series camera
• Camera-specific data sheet
• Camera-appropriate operation manual (if ordered)
2.1.3 Accessories and Options
Following is a list of additional accessories and options that may be required for your application.
Please check with your JAI, Inc. representative before you install your camera to determine what you
might need.
• Digital output cable 30DG-02
• Serial Communication Kit CS-232E
• PD-12U series power supply
• 12P-02S power cable
• 26CL-02-26 Camera Link cable (for TM-1020 Camera Link models)
2.2 Camera Setup
2.2.1 Heat Dissipation
The TM-1020 series camera from JAI, Inc., is a compact 1K by 1K camera. Since all the electronics
have been packed in a compact package, the outer case of the camera gets hot due to heat dissipation.