Filter
Top Products
Page 9
TM-1020 Series Progressive Scan Shutter Cameras
Installation
The CL version has a 26-pin connector on the rear panel to output Camera Link data. The connector
pin-out is shown in Table 4 on page 9.
TABLE 4. Connector and Pin-out Configurations
Note: SerTC: Serial To Camera
SerTFG: Serial to Frame Grabber
2.2.2 (d) Analog Output Connector
The TM-1020 series has a BNC connector on the rear panel to output
analog video data. See Section 6.1, “Specifications,” on page 38 for
additional information on analog video output.
Camera Link Connector
Pin # Description I/O Pin # Description I/O
1 GND 14 GND (Shield)
2 Tx OUT 0- Out 15 Tx OUT 0+ Out
3 Tx OUT 1- Out 16 Tx OUT 1+ Out
4 Tx OUT 2- Out 17 Tx OUT 2+ Out
5 Tx CLK OUT - Out 18 Tx CLK OUT+ Out
6 Tx OUT 3- Out 19 Tx OUT 3+ Out
7 SerTC+ In 20 SerTC- In (LVDS/RS-422 or
RS-232)
8 SerTFG- Out 21 SerTFG+ Out
9 VINIT- In 22 VINIT+ In
10 INTEG+ In 23 INTEG- In
11 N/C 24 N/C
12 N/C 25 N/C
13 GND 26 GND
1
1426
13