Filter
Top Products
Page 16
TM-1020 Series Progressive Scan Shutter Cameras
Operation
3Operation
3.1 Camera Rear Panel (LVDS/RS-422 Version)
3.1.1 Up/Down Switch
The Mode Selection switch works in conjunction with the Up/Down switch. Refer to Table 6 above for
information on the Up/Down switch.
3.1.2 Digital Output Connector
Refer to Section 2.2.5 on page 11 for information on the digital output connector.
3.1.3 Analog Output Connector
The LVDS-version cameras has a BNC connector on the rear panel to output analog video data.
3.1.4 Power, RS-232, and External Sync Connector
Refer to Section 2.2.2 (a on page 6 for information on the power, RS-232, and external sync connector.
3.1.5 Shutter Speed Control Switch
Please refer to Section 2.2.3 on page 10 for information on the Shutter Speed Control dial. The factory
default settings correspond to the shutter speeds as shown in Table 5 on page 10.
SHUTTER MODE
UP
DOWN
POWER
VIDEO
0
9
8
7
6
5
4
3
1
2
1
0
F
E
D
C
B
A
2
3
4
5
6
7
8
9
DIGITAL
1
2
3
4
5
6
9
8
7
11
12
10
Up/Down switch
Digital Output connector
Analog Output connector
Power, RS-232, and
External Sync Connector
Mode Selection switch
Shutter Speed
Control switch