Filter
Top Products
Page 17
TM-1020 Series Progressive Scan Shutter Cameras
Operation
3.1.6 Mode Selection Switch
Various modes can be implemented with the rear panel Mode Selection switch. The Mode Selection
switch works in conjunction with the Up/Down switch and RS-232 external control. Commands from
the RS-232 interface will over-write the rear panel switch settings of the camera. The table below shows
details on various modes.
TABLE 6. Mode Selection Switch
Mode Selection
Switch Position Mode Information Up/Down Switch Functions
0 Normal Mode Display Mode (D)
1 Set Gain Up/Down Change gain
2 Set Vtop (A/D) Up/Down Change A/D ref. top
3 Set Vbottom(A/D) Up/Down Change A/D ref. bottom
4 Gain Selection #1 Up: 9dB, Down: 12dB Lower gain selection
5 Gain Selection #2 Up: 18dB, Down: 22dB Higher gain selection
6 Linear LUT Up: Linear, Down: LUT Linear/LUT selection
7 Knee Selection Up/Down (Scroll) Scroll 10 different LUTs
8 Async Reset Mode Up: Normal, Down:
Async
Async and normal shut-
ter
9 Factory default Recall Up/Down: Recall Factory setting
A Power up Setting Up: Recall, Down: Save Power up page setting
B User Page Storage #1 Up: Recall, Down: Save User page storage setting
C User Page Storage #2 Up: Recall, Down: Save User page storage setting
D Direct Shutter Control Up/Down Shutter speed increment
by 1H
E Scan Format2 Up: Optional, Down:
Binning
Two-row binning selec-
tion
F Scan Format1 Up: Normal, Down:
Normal
Custom option scanning