Filter
Top Products
Page 11
TM-1020 Series Progressive Scan Shutter Cameras
Installation
2.2.5 Digital Output Cable (LVDS/RS-422 version)
FIGURE 5. Digital Output Cable 30DG-02
The TM-1020 series camera uses the cable 30DG-02 from JAI, Inc. as a digital output cable. This cable
has a 31-pin AirBorn connector on the camera end and a 37-pin D-sub male connector on the other end.
Contact your JAI, Inc. representative regarding availability of interface cables for specific frame
grabber models. Pin-out configuration for the digital cable is shown below.
FIGURE 6. Pin-out Configuration for Digital Output Cable
25.0mm
1.00 in
20
1
19
37
16
31
17
1
Female
78.74 in (2 meters)
Male
PIN 1
PIN 2
PIN 3
PIN 4 GND
PIN 5 HD
PIN 6 INTEG
PIN 7 PULSE
PIN 8
PIN 9
PIN 10
PIN 11
PIN 12
PIN 13
PIN 14
PIN 15
PIN 16 NC
PIN 17
PIN 18
PIN 19
PIN 20
FROM 31 PIN CONN
PIN 1
PIN 2
PIN 3
PIN 16 GND
PIN 8
PIN 9
PIN 10
PIN 11
PIN 12
PIN 13
PIN 14
PIN 15
PIN 20
PIN 21
PIN 22
PIN 17
OR 1RED
GRY 1RED
WHT 1RED
YLW 1RED
PINK 1RED
OR 2RED
GRY 2RED
WHT 2RED
YLW 2RED
PINK 2RED
OR 3RED
GRY 3RED
WHT 3RED
YEL 3RED
PINK 3RED
OR 1BLU
GRY 1BLU
WHT 1BLU
YEL 1BLU
PIN 21 VD
PIN 22 EN/INTEG
PIN 23 GND
PIN 24
PIN 25
PIN 26
PIN 27
PIN 28
PIN 29
PIN 30
PIN 31
PIN 23 GND
PIN 27
PIN 28
PIN 29
PIN 30
PIN 31
PIN 32
PIN 33
PIN 34
PIN 35 GND
N/C
PINS 4, 5, 6, 7
18,19, 24, 25,26,
36, AND 37
PIN 1BLU
OR 2BLU
GRY 2BLU
WHT 2BLU
YLW 2BLU
PINK 2BLU
OR 3BLU
GRY 3BLU
WHT 3BLU
YLW 3BLU
PINK 3BLU
SHIELD
TO 37 PIN CONN
WIRE COLOR
FROM 31 PIN CONN) TO 37 PIN CONN
WIRE COLOR