Filter
Top Products
Page 6
TM-1020 Series Progressive Scan Shutter Cameras
Installation
For optimal performance, JAI, Inc. recommends using a cooling fan to set up a positive air flow around
the camera and following the precautions below.
• Mount the camera on a large heat sink (camera bracket) made out of conductive material like alu-
minum.
• Make sure the flow of heat from the camera case to the bracket is not blocked by a non-conductive
material like plastic.
• Make sure the camera has enough open space around it to facilitate the free flow of air.
Please contact JAI, Inc. at (800) 445-5444 or send an email to imaging@jai.com if you have any
questions.
2.2.2 Connector Pin Configurations
2.2.2 (a) 12-Pin Connector (LVDS/RS-422 version)
The TM-1020 series has a 12-pin Hirose connector for power input,
serial communication, and signal integration. Pin #1 is Ground and
Pin #2 is +12V DC. Other pins handle a number of input and output
functions, as shown in Table 1 below.
TABLE 1. 12-Pin Connector (LVDS/RS-422 version)
Pin Description Pin Description
1 GND (power) 7 VD In
2 +12V DC 8 Strobe Out
3 GND (analog) 9 HD In
4 Video Out 10 RXD (RS-232)
5 GND (digital) 11 Integration Control
6 VINIT In 12 TXD (RS-232)
1
2
3
4
5
6
9
8
7
11
12
10