Filter
Top Products
27
ADVANCE SETTINGS
File Naming
File name are followed by a 4-digit number that increases in sequence. File numbering starts from
0001 when a new folder is created.
If the highest folder number is 999 and highest file number exceeds 9999, the camera will display the
warning message “Folder cannot be created”. When it appears, try one of the following ways:
• Reset the file number and plug in a new memory card.
• Format the memory. The folder number and file number are initialized and renumbered from
100 and 0001 respectively.
Note: Do not change the folder and file names in the memory card using your computer. It may
be unable to playback the data using the digital camera.
SETTING THE TV OUT
Your camera can be connected to a TV allowing you to preview images and movie clips on the
television screen. TV Out should be set to either NTSC or PAL depending on your region.
Option Description
NTSC America, Japan, Taiwan, Korea
PAL All of Europe
SETTING USB PORT
You can set USB mode to connect the camera with a printer or computer.
Option Description
Computer To connect your camera to a PC.
Printer To connect your camera to a printer.
CHOOSING A STARTUP IMAGE
You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode.
2. Press
640
320
160
or
640
320
160
to select a desired image.
3. Press the MENU button, then press
640
320
160
or
640
320
160
to select S.IMAGE
(
640
320
160
).
4. Press
640
320
160
or
640
320
160
to select an option, and then press the SET button.
5. Set the camera to the Setup Menu .
6. Press
640
320
160
or
640
320
160
to select S.IMAGE (
640
320
160
) then press
640
320
160
or the
SET button.
7. Press
640
320
160
or
640
320
160
to select a desired image and press the SET or
the MENU button to apply the setting.
8. Press the MENU button to close the menu.
Note: The start-up image will not be deleted even if the original
image is deleted or memory formatted.