Filter
Top Products
6
To remove the memory card, gently press on the edge of the card and release it. Pull the card out
and close the battery cover.
About Camera Memory
The digital camera is equipped with internal memory. If the memory card is not inserted in the camera,
all images and movie clips recorded by the camera will be stored in the internal memory. If the
memory card is inserted, images and movie clips are stored on the memory card.
DCF Protocol
The DCF protocol defines the format for image file data as well as the directory structure for the
memory card. Images that are taken by a DCF camera can be viewed on DCF-compatible cameras
from other manufacturers.
SETTING THE DATE AND TIME
When the camera is first turned on, the date and time setting will
not be correct. So before using, be sure to set date and time.
1. Press the MENU button, using
640
320
160
or
640
320
160
to select SETUP (
640
320
160
)
and press the SET button.
2. Press
640
320
160
or
640
320
160
to select DATE & TIME (
640
320
160
) then press
640
320
160
or
the SET button to launch the Date & Time screen.
3. Press
640
320
160
or
640
320
160
tto change the value of the highlighted field.
Press
640
320
160
or
640
320
160
to highlight another field.
4. After adjusting the settings, press the SET or the MENU button
to apply the setting.
Note:
• If you hold down
640
320
160
or
640
320
160
, you can change the value quickly.
• If the batteries are removed for about two days, the Date & Time setting will be lost. In this
case, make these settings again.
GETTING STARTED