13
RECORDING
Display Option Description
- Single shot Record a single image.
2
2-SEC
The shutter release will be
delay for 2 seconds.
10
10-SEC
The shutter release will be
delay for 10 seconds.
Double
Record two images in a shot
after pressing the shutter
release button 10 and 12
seconds.
Burst
For capturing 4 images in
succession.
4. Shoot the image.
Each option automatically switches to single shot in the following situation:
• After each shot.
• When the mode switched.
• When the camera is turned off.
Note:
• When using the self-timer function, be sure to use a tripod or place the digital camera on a
level, stable surface.
• This function is not available to resolution 8M.
Using the Macro mode
Your camera is equipped with a macro function that allows you to focus on very close subjects. In
macro mode you can focus on subjects 5 cm from the lens when in the maximum wide angle (zoomed
out) setting and 50 cm in the maximum telephoto (zoomed in) setting.
1. Set the camera to the Record mode .
• You can use the macro mode in still image shooting or movie
recording.
2. Press the
button to enter the macro mode.
• The macro mode icon (
) appears on the LCD monitor.
3. To leave the macro mode, press the
button again.
Note:
• Distances referred to measure the distance between the camera lens surface and the subject.
Macro
