25
ADVANCE SETTINGS
SETTING THE TV OUT
Your camera can be connected to a TV allowing you to preview images and movie clips on the
television screen. TV Out should be set to either NTSC or PAL depending on your region.
Option Description
NTSC America, Japan, Taiwan, Korea
PAL All of Europe
SETTING USB PORT
You can set USB mode to connect the camera with a printer or computer.
Option Description
Computer To connect your camera to a PC.
Printer To connect your camera to a printer.
CHOOSING A STARTUP IMAGE
You can choose a recorded image as the start-up image.
1. Set the camera to the Playback mode.
2. Press
or
to select a desired image.
3. Press the MENU button, then press
or
to select S.IMAGE
(
).
4. Press
or
to select an option, and then press the SET button.
5. Set the camera to the Setup Menu .
6. Press
or
to select S.IMAGE (
) then press
or the
SET button.
7. Press
or
to select a desired image and press the SET or
the MENU button to apply the setting.
8. Press the MENU button to close the menu.
Note:
• The start-up image will not be deleted even if the original image is deleted or memory
formatted.
