Filter
Top Products
EN
36
12
12:34:24
bit/SOUND
1
4
6
L
0
30’52
3:5
MP
CED
USING MENUS FOR DETAILED ADJUSTMENT
ON SCREEN setting:
For playback sound, tape
speed and tape running.
DATE/TIME setting:
For date/time.
Display
Minutes
Seconds
Frames*
* 30 frames = 1 second
TIME CODE setting:
For time code.
VIDEO DISPLAY
•Settings made in the “ VIDEO DISPLAY” Menu are
effective only for tape playback.
ON SCREEN
OFF: Camcorder's display (except the date, time and
time code) is not shown on LCD or connected TV.
[LCD]: Camcorder's display is shown only on LCD
and not on connected TV (except the date, time and
time code).
LCD/TV: Camcorder's display is shown on both LCD
and connected TV.
DATE/TIME , TIME CODE
Refer to “ CAMERA DISPLAY” on page 34, 35.
The factory-preset of “DATE/TIME” in the “ VIDEO
DISPLAY” Menu is “OFF”.
Playback Sound
During tape playback, the camcorder detects the sound
mode in which the recording was made, and plays the
sound back. Select the type of sound to accompany
your playback picture. According to the menu access
explanation on pg. 35, select “SOUND MODE” or “12bit
MODE” from the Menu Screen and set it to the desired
parameter.
SOUND MODE
[STEREO ]: Sound is output on both “L” and “R”
channels in stereo.
SOUND L : Sound from the “L” channel is output.
SOUND R : Sound from the “R” channel is output.
12bit MODE
MIX: Original and dubbed sounds are combined and
output in stereo on both “L” and “R” channels.
[SOUND 1]: Original sound is output on both “L” and
“R” channels in stereo.
SOUND 2: Dubbed sound is output on both “L” and
“R” channels in stereo.
[ ] = Factory-preset
NOTES:
• The camcorder cannot detect the sound mode in which
the recording was made during fast-forward or rewind.
During playback the sound mode is displayed in the upper
left corner.
• The “SOUND MODE” setting is available for both
12-bit and 16-bit sound. (In previous models’ functions,
“12-bit” is called “32 kHz” and “16-bit” is called “48 kHz”.)
–EE
–O
–
IVDE
O
DISPLAY
R
ENEON SC
TIDA METE/
CODTIM
LCD
OFF
FF
RETURN