JVC GR-DX300 Digital Camera User Manual


 
EN
44
SYSTEM CONNECTIONS
“ACCESSING FILES” appears on the LCD monitor
while the PC is accessing data in the camcorder or the
camcorder is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.
To DV )
To USB
connector
DV cable
(optional)
To DV
connector
USB cable
(provided)
To USB (
PC with DV connectorPC
Core filter
OR
Core filter
[A] Using USB cable [B] Using DV cable
Connection To A Personal Computer
[A] Using USB cable
It is possible to do the following things:
Transfer still/moving images stored on a memory card to
a PC.
Transfer still/moving images recorded on a tape to a PC.
Capture still/moving images in real-time.
Use this camcorder as a WebCam.
[B] Using DV cable
It is also possible to transfer still/moving images to a
PC with a DV connector by using the provided
software, software equipped with the PC or
commercially available software.
NOTES:
Refer to “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE” for the installation of the bundled
software and drivers.
It is recommended to use the AC Adapter as the
power supply instead of the battery pack (
pg. 7).
Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only the
cable you wish to use to the camcorder.
If the PC connected to the camcorder via the USB cable
is not powered, the camcorder does not enter the USB
mode.
The date/time information cannot be captured into the
PC.
Use the provided software PIXELA ImageMixer to
capture video in real-time.
You can also use the camcorder for webconference by
using Windows
®
Microsoft Netmeeting and signing up for
Microsoft Hotmail.
Refer to the instruction manuals of the PC and Software.
The still images can also be transferred to a PC with a DV
connector-equipped capture board.
When using a DV cable, be sure to use the optional
JVC VC-VDV206U or VC-VDV204U DV cable depend-
ing on the type of DV connector (4 or 6 pins) on the
PC.
The system may not work properly depending on the PC
or capture board you are using.
When using the DV connection refer to manufacturer
instructions of your capture board for driver’s installation
and operation instructions.
*When connecting cables, open this cover.
Connector cover*