Filter
Top Products
32
Shooting
Applicable to: Full Auto shooting mode A, Manual shooting
mode M
Shortens the closeup distance at the tele [T] end of the
zoom. (1 m B approx. 80 cm)
There are two ways to set this feature.
A Set [Tele Macro] in the [Camera Function] menu to AOnB.
(A Page 65)
B Assign the tele macro function to a user button and press
the button. ( A Page 19, 66 )
* Set [Main Menu]B[Camera Function]B[Switch
Set]B[USER1]/[USER2]/[LOLUX/3]/[C.REVIEW/4]/
[ZEBRA/5]/[REC/6] to ATele MacroB. (A Page 66)
●
When the tele macro feature is turned
A
On
B
, a tele macro
icon appears on the screen.
Memo :
● When Program AE is set to ATwilightB, the tele macro
feature is forcibly turned AOffB.
Applicable to: Full Auto shooting mode A, Manual shooting
mode M
During video shooting, diagonal lines (zebra pattern) are
displayed only at areas with the specified luminance levels.
You can specify the luminance level range for displaying the
zebra pattern.
Displaying the Zebra Pattern
There are two ways to display the zebra pattern.
A Set [LCD/VF] menu B[Shooting Assist]B[Zebra] to AOnB.
(A Page 70)
B Assign the zebra function to a user button and press the
button. ( A Page 19, 66 )
* Set [Main Menu]B[Camera Function]B[Switch
Set]B[USER1]/[USER2]/[LOLUX/3]/[C.REVIEW/4]/
[ZEBRA/5]/[REC/6] to AZebraB. (A Page 66)
● A zebra pattern is displayed at the area that corresponds
to the specified luminance level.
Memo :
● When [Display On TV] in the [A/V Out] menu is set to
AOnB, the zebra pattern display is output on the external
monitor. Set [Display On TV] to AOffB to clear the display
on external monitors. (A Page 73)
Ⅵ Clearing the zebra pattern display
There are two ways to clear the zebra pattern display.
●
Set [LCD/VF] menu
B
[Shooting Assist]
B
[Zebra] to
A
Off
B
.
●
Press the user button that is set as
A
Zebra
B
.
Using the Tele Macro
Feature
Tele Macro Icon
Displaying the Zebra
Pattern
Zebra Pattern
GY-HM150U.book Page 32 Monday, September 5, 2011 1:48 AM