Filter
Top Products
90
Camera Features
Loading Clips to the PC (USB Mode)
You can load clips to a PC by connecting the camera
recorder to the PC via the USB port. Doing so enables clips
stored in the SDHC/SDXC card to be managed and edited
on the PC.
Files on the SDHC/SDXC card can be managed/edited on
the connected PC in this mode only for USB mass storage
class devices that are recognized by the PC as a peripheral
drive.
Memo :
● Files cannot be written to the SDHC/SDXC card.
●
Make sure to manage/edit files recorded in the MP4 file
format using the (JVC ProHD Clip Manager) PC application
software in the bundled CD-ROM.
● For details on how to install the application software, refer
to the [User’s Guide] of the [JVC ProHD Clip Manager]
inside the bundled CD-ROM.
1
Connect the camera recorder to the PC using a USB
cable.
A confirmation message AChange to USB ModeB to enable
the USB connection appears.
2 Select [Change] using the set lever (JK), and press
the center of the set lever.
The camera recorder switches to USB mode.
Memo :
●
If recording is in progress, the
A
Change to USB Mode
B
message appears after recording stops.
●
If playback is in progress, the camera recorder switches to
USB mode after the file closes automatically, such as when
playback stops.
ⅥDisconnecting
Disable the connection on the PC, then remove the USB
cable from the camera recorder.
Doing so exits the USB mode and switches the camera
recorder to Camera mode.
Memo :
● The procedure for disabling the USB connection varies
according to the PC in use. For details, refer to the
instruction manual of the PC.
When your PC cannot recognize the SDXC
card
Confirm and update the OS of your PC.
Managing/Editing Clips on
a PC
DC
OPEN
REC
PUSH
OIS
SHUTTER
AE
ADJ./ VOL.
CLOSE
ACCESS
PC
[USB] Terminal
Windows XP/
Windows XP SP1
Necessary to update to SP2 or higher.
Windows XP SP2/
Windows XP SP3
Necessary to download the update
software.(KB955704)
http://www.microsoft.com/downloads/
details.aspx?familyid=1CBE3906-DDD1-
4CA2-B727-
C2DFF5E30F61&displaylang=en
Windows Vista Necessary to update to SP1 or higher.
Windows Vista SP1/
Windows Vista
Necessary to download the update
software.(KB975823)
● 32 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=2d1abe01-0942-
4f8aabb2-2ad529de00a1
● 64 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=7d54c53f-017c-
4ea5-ae08-34c3452ba315
Windows 7 Necessary to download the update
software. (KB976422)
● 32 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=3ee91fc2-a9bc-
4ee1-aca3-2a9aff5915ea
● 64 bit version
http://www.microsoft.com/downloads/en/
details.aspx?FamilyID=73f766dd-7127-
4445-b860-47084587155f
2
GY-HM150U.book Page 90 Monday, September 5, 2011 1:48 AM