Filter
Top Products
95
Tally Lamps
The tally lamps start blinking when the remaining space on the SDHC/SDXC card is running out during recording, or when the
battery power is running low.
Error Display
Status Action
Status Screen
Menu Screen
Thumbnail Screen
VIDEO FORMAT
INCORRECT
^ ● Video format of the file for Clip
Review is different from the [Frame
& Bit Rate] setting of the camera
recorder.
Set [Camera Resolution] and [Frame & Bit
Rate] correctly. (A Page 63)
MEDIA FULL ^ ● [REC] button is pressed when the
media in use has no remaining
space.
● Remaining space ran out during
recording.
Memo :
● This error may appear even when
there is still remaining space
displayed on a PC, etc.
(A Page 20)
Replace the SDHC/SDXC card with a new
one.
READING MEDIA INFO ^ ● Recording operation was
performed while inserted card was
being checked.
When a card is inserted, press the record
button after the card slot status indicator
lights up.
GETTING OVERHEATED PLEASE TURN P.OFF ● Battery temperature rose. ● Turn off the power and wait for some time
before using again.
● Replace the battery.
PLEASE TURN P.OFF
BATTERY COM. ERROR --- ● Communication error in battery
has occurred.
● Replace the battery.
Blinking Mode Remaining Battery Power/SDHC/SDXC Card Space
Blinks slowly
(once every second)
● Battery power is low
● Remaining recording time on SDHC/SDXC card is less than 3 minutes
Blinks quickly
(2 times a second)
● SDHC/SDXC card is full
● Error on the camera recorder
GY-HM150U.book Page 95 Monday, September 5, 2011 1:48 AM