JVC GZ-HD3U Camcorder User Manual


 
69
ENGLISH
Menus Settings: [ ] = Factory-preset
GENERAL
DATE/TIME
Displays the current time on the
LCD monitor.
OFF : The date/time does not appear.
[AUTO] : The date/time appears for approx. 5 seconds in
the following cases.
When the power/mode switch is set from OFF to ON
When playback starts
ON : The date/time is always displayed.
PRESET
Returns all the camera settings
to their default values.
EXECUTE : Performs this function.
[CANCEL] : Returns to the menu screen without
executing reset.
BRIGHT
Sets the brightness of the LCD
monitor.
Adjust the brightness of the display by moving the set
lever to / , then press down.
DROP DETECTION
Prevents damage to the
HDD by turning off the power
automatically when it is detected
that the camera dropped.
OFF : Disables the function.
[ON] : Activates the function.
To turn the camera on when the drop detection
worked, set the power/mode switch to OFF, and to
ON again.
CAUTION
Setting this function to off increases the risks of damaging
the built-in hard disk if the camera is accidentally dropped.
FOCUS ASSIST
When this function is used, the
outline of the focused object is
displayed in the selected color.
[BLUE] / RED / GREEN
REMOTE
Turns reception of the operation
signal from the remote control
on/off.
OFF : The camera does not receive the signal from the
remote control.
[ON] : Enables operation with the remote control.
DEMO MODE
Introduces special features of
the camera when there is no
operation for about 3 minutes
during recording mode.
OFF : Disables the function.
[ON] : Activates the function.
NOTES
The demonstration only works when the AC adapter is
connected, not with the battery.
If an SD card is in the camera, demonstration will not take
place even if this mode is set to [ON].
OPERATION SOUND
Turns the operation sound on/off.
OFF : Turns off the operation sound.
[MELODY] : The melody sounds when operations are
performed.