Filter
Top Products
76
Trouble Action
੬
Other problems
Files cannot be
deleted.
•
Remove protection from the fi les and delete them. 37
The data process is
too slow after the
power is switched
on or the mode is
changed.
•
There is a large number of still images (approx. 1,000 or
more) stored in the recording medium. Copy the stored
fi les to other devices, and delete them from the recording
medium.
46, 52
The SD card cannot
be removed from the
camera.
•
Push the SD card in a few more times. 19
When connected
with an i.LINK
cable, the camera
does not operate
even if controls are
attempted from the
PC, etc.
•
Linked operation from an i.LINK connection is not
supported.
–
Dubbing cannot
be done in high-
defi nition.
•
To dub videos in high-defi nition, select [1440 CBR]
quality.
•
Use the i.LINK connection for dubbing.
— Set the [i.LINK OUTPUT (DUB)] setting to [1440
CBR].
— Make a playlist consisted of video fi les of [1440 CBR]
quality, then dub the playlist.
67
49
70
50
When dubbing a
playlist using i.LINK
output, some videos
cannot be played
back.
•
If the [i.LINK OUTPUT (DUB)] setting is set to [1440
CBR], videos of [XP] and [SP] qualities are not output,
even if they are included in the playlist. If you want to
perform dubbing in high-defi nition quality, do not include
fi les other than 1440 CBR in the playlist.
•
When connecting a device that supports DV input, you
can output fi les recorded at other quality settings. Set
the [i.LINK OUTPUT (DUB)] setting to [DV]. However, the
quality of the dubbed images will be the standard quality.
•
When connecting a device using the AV/S cable, you
can output fi les irrespective of the quality. However, the
quality of the dubbed images will be the standard quality.
43
70
50
Troubleshooting (Continued)