Filter
Top Products
EN83
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
35.
•Certain Fade/Wipe effects,
certain modes of Program AE
with special effects, “DIS” and
other functions that cannot be
used together are selected at
the same time.
36.
•The LCD monitor and the
viewfinder are made with high-
precision technology. However,
black spots or bright spots of
light (red, green or blue) may
appear constantly on the LCD
monitor or the viewfinder.
These spots are not recorded on
the tape. This is not due to any
defect of the unit. (Effective
dots: more than 99.99 %)
37.
•The optional headphones are
not connected to the
headphones connector.
•The sound volume of the
headphones connector was
not adjusted appropriately. The
sound volume at this point is
the same as the level it was
adjusted to during playback.
38.
•The POWER Switch is not set
to “ ”.
39.
• The POWER Switch is set to
“ ” or “ ”.
40.
• Your TV has AV input terminals,
but is not set to its VIDEO mode.
•The cassette holder cover is
open.
41.
•During playback of the
unrecorded portion, High-speed
Search and still playback, LCD
monitor indications appear
distorted. This is not a defect.
42.
•The speaker volume is too great.
43.
————
44.
————
35.
•Re-read the sections covering
Fade/Wipe effects, Program
AE with special effects and
“DIS” (੬ pg. 30, 36 – 38).
36.
————
37.
•Connect the optional
headphones to the headphone
connector (੬ pg. 86, 87).
•Adjust the sound volume
during playback (੬ pg. 42).
38.
•Set the POWER Switch to
“ ” (੬ pg. 42).
39.
•Set the POWER Switch to
“
M
E
M
O
R
Y
P
L
A
Y
” (੬ pg. 47).
40.
•Set the TV to the mode or
channel appropriate for video
playback (੬ pg. 58, 59).
•Close the cassette holder
cover (੬ pg. 12).
41.
————
42.
•Turn the speaker volume down
(੬ pg. 42).
43.
•Clean the video heads with an
optional cleaning cassette
(੬ pg. 94).
44.
•Wipe them gently with soft
cloth. Wiping strongly can
cause damage (੬ pg. 78).
35.
The LCD monitor or
viewfinder indications blink.
36.
Colored bright spots appear
all over the LCD monitor or
the viewfinder.
37.
During recording, sound
cannot be heard.
38.
Play, Rewind and Fast-Forward
functions do not work.
39.
A MultiMediaCard cannot
be played back.
40.
The tape is moving, but
there is no picture.
41.
The LCD monitor image is
distorted.
42.
Images on the LCD monitor
are jittery.
43.
Blocks of noise appear
during playback, or there is
no playback picture and the
screen becomes blue.
44.
The LCD monitor, the
viewfinder and the lens have
become dirty (ex. fingerprints).
CONTINUED ON NEXT PAGE