Filter
Top Products
26 EN
RECORDING
Basic Features (cont.)
FEATURE:
Quick Review (for scenes
recorded onto a tape)
PURPOSE:
To check the end of the last recording.
OPERATION:
1) Set the System Select Switch to “VIDEO”, then set the
Power Switch to “CAMERA” (“AUTO” or “PRO.”).
2) Press
2
and release quickly during the Record–
Standby mode.
Ⅲ Tape is rewound for approx. 2 seconds and played
back automatically, then pauses in Record–Standby
mode for the next shot.
NOTE:
Distortion may occur at the start of playback. This is
normal.
FEATURE:
Quick Review (for still
images stored in the
built-in memory)
PURPOSE:
To check the still image most recently stored in the
built-in memory.
OPERATION:
1) Set the System Select Switch to “D.S.C.”, then set the
Power Switch to “CAMERA” (“AUTO” or “PRO.”).
2) Press
2
and release quickly.
Ⅲ The still image is displayed for approx. 3 seconds.
The message “DELETE OK? PRESS PLAY BUTTON”
appears.
To remove the still image you have checked (Instant
Delete) . . .
1) Press
4
/6. The still image is deleted.
To cancel, press 5.
FEATURE:
Retake
PURPOSE:
To re-record certain segments.
OPERATION:
1) Make sure the camcorder is in the Record–Standby
mode.
2) Press and hold either RETAKE to reach the start point
for new recording. Pressing
3
forwards the tape
and pressing
2
reverses it.
3) Press the Recording Start/Stop Button to start
recording.
NOTE:
Noise bars appear and pictures may become
monochrome or darken during Retake. This is normal.
Play/Pause (
4
/6) Button
RETAKE
(
2
/
3
)
Button
Stop (5) Button