Filter
Top Products
EN39
1
Load a tape (੬ pg. 12).
2
Set the System Select Switch to “VIDEO”, then set the
Power Switch to “PLAY”. To start playback, press
4
/6.
•To stop playback, press 5.
•Press
2
to rewind, or
3
to fast-forward the tape
during Stop mode.
NOTES:
●
The camcorder shuts off automatically after about
5 minutes in Stop mode. To turn on again, set the Power
Switch to “OFF”, then to “PLAY”.
●
When the Power Switch is set to “PLAY” and the LCD
monitor is opened at an angle of 60 degrees or more, the
LCD monitor switches on and the viewfinder switches
off automatically to save power.
●
The playback picture can be viewed in the viewfinder
(with the LCD monitor shut), on the LCD monitor or on
a connected TV (
੬
pg. 42, 43).
●
You can also view the playback picture on the LCD
monitor with it flipped over and retracted.
●
If a blank portion on the tape is played back, the screen
may become black. This is not a malfunction.
VIDEO PLAYBACK
Basic Playback
Rewind (
2
) Button
Fast-Forward (
3
) Button
Play/Pause (
4
/6) Button
Stop (5) Button
Power Zoom Lever (VOL.)
Select Wheel
(BRIGHT)
Set to “VIDEO”.
Set to “PLAY”.
Speaker
LCD Monitor Brightness Adjustment: Rotate
the Select Wheel (BRIGHT) towards “+” to brighten, or
towards “–” to darken.
●
The Bright Level Indicator is displayed under the Date/
Time Display when you play back images recorded in
Wide Mode (
੬
pg. 31).
Speaker Volume Control: Slide the Power
Zoom Lever (VOL.) towards “+” to turn up the volume,
or towards “–” to turn down the volume.
●
The Speaker Volume Indicator is displayed under the
Date/Time Display when you play back images recorded
in Wide Mode (
੬
pg. 31).
Still Playback: Pauses during playback.
1) Press
4
/6 during playback.
2) To resume normal playback, press
4
/6 again.
●
If TBC (
੬
pg. 40) is not engaged, noise bars will appear
and the picture will become monochrome during Still
Playback.
●
If TBC is engaged, noise bars will not appear. This mode
is called Fine Still.
Shuttle Search: Allows high-speed search in either
direction.
1) Press
3
for forward or
2
for reverse search during
playback.
2) To resume normal playback, press
4
/6.
●
During playback, press and hold
2
or
3
. The search
continues as long as you hold the button. Once you
release it, normal playback resumes.
●
Noise bars appear and pictures may become mono-
chrome or darken during Shuttle Search. This is normal.