Filter
Top Products
32 EN
RECORDING
Advanced Features (cont.)
Menu Screen Available Using The MENU Button (cont.)
: Factory-preset
* Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”,
this function will not be activated although the highlight bar will move on the Menu Screen like the setting
procedure.
** Activated only with the System Select Switch set to “D.S.C.”. If the System Select Switch is set to “VIDEO”,
this function will not be activated although the highlight bar will move on the Menu Screen like the setting
procedure.
Functions listed without */** are available with the System Select Switch set to either “D.S.C.” or “VIDEO”.
***S-VHS ET is displayed when a VHS cassette is loaded, and S-VHS is displayed when an S-VHS cassette is
loaded (੬ pg. 15). If a cassette is not loaded, “S-VHS” will be displayed in the Menu Screen.
S-VHS ET is preset to “OFF”.
ON Records in S-VHS on a VHS or S-VHS cassette (੬ pg. 15).
OFF Records in VHS on a VHS or S-VHS cassette (੬ pg. 15).
Allows you to set the tape length depending on the tape used (੬ pg. 14).
Refer to “Picture Mode Setting” (੬ pg. 22).
Displayed with the System Select Switch set to either “VIDEO”
(੬ pg. 23) or “D.S.C.” (੬ pg. 21).
Displayed only with the System Select Switch set to “D.S.C.”
(੬ pg. 21).
Refer to “Animation” (੬ pg. 34) and “Time-Lapse” (੬ pg. 35).
Refer to “Time-Lapse” (੬ pg. 35).
Allows you to select the language (ENGLISH, FRENCH, SPANISH or PORTUGUESE)
of Instant Titles (੬ pg. 33).
Allows you to set the current date and time (੬ pg. 13).
This number is necessary when connecting the camcorder to a device such as a computer
using the J terminal (JLIP). The numbers range from 01 to 99. Factory setting is 06.
ON Demonstrates certain functions such as Fade/Wipe, etc. When
“DEMO MODE” is set to “ON” and the Menu Screen is closed,
the demonstration starts.
Operating the Power Zoom Lever during the demonstration
stops the demonstration temporarily. If the Power Zoom Lever is
not moved for more than 1 minute after that, the demonstration
will resume.
NOTE:
When a tape whose Erase Protection tab is in the position that
allows recording is loaded in the camcorder, demonstration is
not available.
OFF Automatic demonstration will not take place.
TAPE LENGTH*
PICTURE**
SNAPSHOT
REC TIME*
JLIP ID NO.
DEMO MODE*
INT. TIME
TITLE LANG.*
S-VHS***
(S-VHS ET***)
DATE/TIME
FULL
PIN-UP
MULTI-4
MULTI-9