JVC GR-SXM920 Camcorder User Manual


 
EN31
* Activated only with the System Select Switch set to “VIDEO”. If the System Select Switch is set to “D.S.C.”,
this function will not be activated although the highlight bar will move on the Menu Screen like the setting
procedure.
Functions listed without an asterisk are available with the System Select Switch set to either “D.S.C.” or
“VIDEO”.
Menu Screen Available Using The Select Wheel
CONTINUED ON NEXT PAGE
: Factory-preset
Menu Screen Available Using The MENU Button
This Menu Screen cannot be accessed while recording.
MENU SCREEN EXPLANATIONS
Refer to “Focusing” ( pg. 37).
Refer to “Exposure Control” ( pg. 36).
Refer to “White Balance Adjustment” and “Manual White Balance Operation”
( pg. 38).
OFF Does not display black bars.
ON Allows you to record black bars at the top and bottom of the screen
to produce a cinema-like “wide-screen” effect. If a snapshot
( pg. 20, 23) is taken while the camcorder is in the WIDE
mode, the snapshot image is recorded without the black bars at
the top and bottom of the screen.
MAX To record a subject in a darkly lit environment, when it is more
convenient to shoot the subject with a brighter image even if the
picture becomes slightly coarse.
NORMAL To record a subject in a dimly lit environment, when it is more
convenient to shoot with a less coarse picture although the
subject becomes slightly dark. This setting is suitable for
measuring sensitivity conforming to EIA-639 (EIA* Standard for
Low Light Sensitivity Measurement).
*EIA : Electronic Industries Alliance
OFF Allows you to shoot dark scenes with no picture brightness
adjustment.
Allows you to superimpose one of eight preset titles ( pg. 33).
Makes the date/time settings appear in the camcorder or on a connected monitor
( pg. 33).
ON Allows you to use the Digital Zoom. By digitally processing and
magnifying images, zooming is possible from 16X (the optical
zoom limit), to a maximum of 400X digital magnification.
OFF Digital Zoom is not available. Only optical zoom (maximum
16x magnification) can function. When set to “OFF” during
Digital Zoom, zoom magnification changes to 16X.
Usually the distance to a subject where the lens is in focus
depends on the zoom magnification. Unless there is a distance of
more than 1 m (3.25 ft.) to the subject, the lens is out of focus at
the maximum telephoto setting. When set to “ON”, you can
shoot a subject as large as possible at a distance of approx. 60 cm
(23-5/8").
•Depending on the zoom position, the lens may go out of focus.
OFF
ON
D. ZOOM
TELE MACRO
TITLE*
DATE/TIME
DISP.*
S.LX
FOCUS
EXPOSURE
WIDE
M.W.B.