Filter
Top Products
E27
1/15s
1/8s
1/60s
1/30s
1/250s
1/125s
1/1000s
1/2000s
1/500s
337
395
287
304
277
278
277
277
277
0.203 ± 0.063
0.203 ± 0.063
0.203 ± 0.063
0.203 ± 0.063
2.953 ± 0.063
0.203 ± 0.063
5.953 ± 0.063
6.453 ± 0.063
4.953 ± 0.063
A
B
FREEZE
VD (internal)
EXP (CCD
accumulation
period)
FLASH
ANALOG
OUT
WEN
Ⅲ When the shutter mode is “RANDOM”
• CCD accumulation is performed in sync with the trigger input, and this period is output as the
FLASH signal.
• At the same shutter speeds the delay from the trigger input to the FLASH output is almost
uniform as shown in Table A below. Also, the pulse width of the FLASH output differs with the
shutter speed.
• The trigger input interval is restricted as shown in Table B. Do not input at a shorter
interval than the minimum interval shown in the table.
MEMO
• In the condition where the shutter mode is RANDOM, the image quality may deteriorate at the time of
FREEZE as noise may be applied or white spots may appear.
Shutter
speed
A
Delay [ms]
B
Minimum
trigger
interval [ms]
* In the following situations, the FLASH signal is continuously generated in sync with the CCD
regardless of the external trigger.
● When [SHUTTER] on the EXPOSURE screen is set to “EEI”.
● When [GAIN] on the EXPOSURE screen is set to “ALC”.
● When [IRIS MODE] on the EXPOSURE screen is set to “AUTO”.
● While AW (Auto White) is operating.