Filter
Top Products
27
5 / BARS
∞/ AW
SETMENU
1234
--- ---SYSTEM
NEGA OFFTIVE
O
N
SETUP
CANCEL
PENIP
PAGE
BACK
DV SYSTEM JVC
XEL COM
--- ---SYSTEM
NEGA ONTIVE
O
N
SETUP
CANCEL
PENIPXELCOM
PAGE
BACK
DV SYSTEM JVC
[MENU] [SET]
[5]
[∞]
Output of Negative Image
“SYSTEM” Screen
“SYSTEM” Screen
2. 3.
4. 5.
Make sure that the Switch 4 located at the side of this unit is
set to [OFF] (lower side).
1.
Press the [MENU] button for 1-2 seconds.
The “MENU” screen will be displayed.
2.
Use the [5/∞] buttons to select “SYSTEM..”, then press the
[SET] button.
The “SYSTEM” screen will be displayed.
3.
Use the [5/∞] buttons to select “NEGATIVE”, then press the
[SET] button.
The set value starts blinking and adjustment is possible.
4.
Use the [5/∞] buttons to set value to “ON”, then press the
[SET] button.
This will be recorded in the memory of this unit.
Output image will be converted to negative images.
5.
Press the [MENU] button for 1-2 seconds.
The normal screen will be displayed.
Blinking
It is possible to convert video signals from the various output terminals of this unit into negative images.
Switch 4: [OFF]