Filter
Top Products
3
Analog signal output (for installation)
This camera is equipped with an analog video
monitor signal output terminal, which is used for
adjusting the camera angle during installation.
Saving JPEG images to the FTP server
at regular intervals
JPEG images may be uploaded to the FTP
server at regular intervals.
Alarm input/output
This camera comes with a motion detection
feature and dual alarm input.
During motion detection or alarm input, actions
such as mail delivery, message transmission via
TCP/UDP, alarm output, or a combination of any
two actions can be triggered.
Installing an FTP server enables uploading of
images before and after the alarm input time
(pre-/post-recording) to the server.
Fine focus adjust
This feature eases fine-tuning of the focus, and
enables focus to be accurately adjusted
speedily.
Getting Started
Features ........................................................ 2
Contents........................................................ 3
Precautions ................................................... 4
Name and Function of Parts.......................... 6
Connection/Installation
Mounting the Camera.................................. 10
Embedding the Camera into the Ceiling
....10
Mounting with the cables pulled out
from the side ........................................12
Connecting the Alarm Input/Output Cable
..... 13
Others
Troubleshooting........................................... 14
Specifications .............................................. 15
How to read this INSTRUCTIONS
(Installation)
Ⅵ Symbols used in this manual
Note :States precautions to be taken
during operation.
Memo :States restrictions on the functions
or use of this equipment. For
reference purposes.
A :Indicates the page numbers or
items to refer to.
Ⅵ Contents of this manual
● JVC holds the copyright to this manual. Any
part or all of this manual may not be
reproduced without prior consent from the
company.
● Windows is a registered trademark of
Microsoft Corporation in the U.S.
● Product names of other companies
described in this manual are trademarks or
registered trademarks of the respective
companies. Symbols such as ீ, ா and
are omitted in this manual.
● Design, specifications and other contents
described in this manual are subject to
change for improvements without prior
notice.
Contents