JVC LYT1094-001A Camcorder User Manual


 
28 EN
Master Page: Left
To remove protection from all files stored
in the memory card
9 Press + or to select “CANC.ALL”, and press
SET/SELECT. The PROTECT screen appears.
10 Press + or to select “EXECUTE”, and press
SET/SELECT.
To cancel selection, select “RETURN”.
Previously stored files can be deleted either one at a
time or all at once.
1 Load a memory card. ( pg. 16)
2 Set the VIDEO/MEMORY Switch to “MEMORY”.
3 Set the Power Switch to “P” while pressing
down the Lock Button located on the switch.
4 Open the LCD monitor fully, or pull out the
viewfinder fully.
The type of file (IMAGE, E-MAIL CLIP or
SOUND) which has been played back at the
last time is displayed.
If you want to select another type of file, go to
step 5.
If not, go to step 7.
5 Press SET/SELECT. The MEMORY SELECT screen
appears.
6 Press + or to select the desired type of file, and
press SET/SELECT.
7 Press MENU. The Menu Screen appears.
8 Press + or to select “DELETE”, and press SET/
SELECT. The Sub Menu appears.
To delete the currently displayed file
9 Press + or to select
“CURRENT”, and press
SET/SELECT. The DELETE
screen appears.
10 Turn the SHUTTLE
SEARCH Ring to the left
(3) or to the right (5)
to select the desired file.
11 Press + or to select
“EXECUTE”, and press
SET/SELECT.
To cancel deletion,
select “RETURN”.
Repeat steps 10 and 11
for all files you want to
delete.
NOTE:
If the “ ” mark appears, the selected file is
protected and cannot be deleted.
To delete all files stored in the memory
card
9 Press + or to select “ALL”, and press SET/
SELECT. The DELETE screen appears.
10 Press + or to select “EXECUTE”, and press
SET/SELECT.
To cancel deletion, select “RETURN”.
NOTES:
Protected files ( pg. 27) cannot be deleted. To
delete them, remove protection first.
Once files are deleted, they cannot be restored.
Check files before deleting.
Deleting Files
Power Switch
Lock Button
VIDEO/MEMORY Switch
MENU Button
SET/SELECT
Button
+, – Button
SHUTTLE SEARCH Ring (3/5)
CAUTION:
Do not remove the memory card or perform any
other operation (such as turning off the
camcorder) during deletion. Also, be sure to use
the provided AC Power Adapter/Charger, as the
memory card may be corrupted if the battery
becomes exhausted during deletion. If the
memory card becomes corrupted, initialise it.
( pg. 30)
DELETE
M
E
NU
RENT
ALL
RETURN
CUR
ELETED
EXECUTE
DELETE?
RETURN
D.S.C. PLAYBACK (cont.)
GR-DVP9-8PAL.book Page 28 Friday, February 7, 2003 12:35 PM