Filter
Top Products
ENGLISH
25
RECORDING/
PLAYBACK
Turning on the Face Detection Mode
If you set this mode on, the camcorder detects
the faces and adjust brightness and focus so
that the faces are recorded clearly.
Preparation:
• Select ! or # mode.
• Select the recording mode.
Select .
W
T
/
To turn off the face detection mode
Select again.
NOTE
•
If the LCD monitor is turned upside down,
is not displayed. Change the setting when
the LCD monitor is in the normal position.
•
Depending on the condition, faces may not
be detected.
•
If the face detection does not work correctly,
turn off the mode before recording.
Checking the Remaining Battery
Power
Preparation:
•
Disconnect the AC adapter from the
camcorder.
•
Attach the battery pack.
•
Select the recording mode.
For ! mode:
Press INFO three times or INFO and then
select
;
.
For # mode:
Press the INFO button.
DIRECT
DISC
INFO
$#66'4;%10&+6+10
/#:
OKP
6+/'
QUIT
To return to the normal screen
Select [QUIT] or press INFO.
NOTE
The recordable time display should only be
used as a guide. It is displayed in 10-minute
units.
Checking the Remaining Space
on the Recording Media
Preparation:
•
Select ! mode.
•
Select the recording mode.
Press the INFO button once (Slot A) or
twice (Slot B).
DIRECT
DISC
INFO
MAX RECORDING TIME
SLOT B
0h00m
0h00m
0h00m
0h00m
SET
QUIT
The maximum recording time is displayed for
each picture quality mode.
To change the video quality
1) Select the video quality.
2) Select [SET].
To change the recording media
1) Press
INFO to select SLOT A or
SLOT B.
2) Select [SET].
To quit the screen
Select [QUIT].