Filter
Top Products
Indication Action
RECORDING FAILURE
•
Remove and re-insert the SD card. (MultiMediaCard cannot
be used.)
•
Remove any dirt from the SD card terminals.
•
Insert the SD card before switching the power on.
PLAYBACK FAILED
USE AC ADAPTOR
•
Use the AC Adapter as power supply.
POWER IS OFF, OR USB
DEVICE IS UNSUPPORTED
•
Turn on the power of the connected USB device.
•
Connect the AC adapter to the BD/DVD burner.
DVD-RW DISC HAS BEEN
ALREADY USED
•
Replace the disc of the BD/DVD burner with another disc.
FINALIZATION FAILED
•
Replace the disc of the BD/DVD burner with another disc.
NO FILES
•
Slide the mode switch to select the desired mode (! or #).
VIDEO MANAGEMENT FILE
IS DAMAGED, RECOVERY IS
REQUIRED TO RECORD/
PLAYBACK, RECOVER?
•
Select [OK] to restore.
NO EVENT REGISTERED
SCENES
•
Register events to the files before you start recording.
CANNOT DETECT FACE
•
Turn the face detection mode on before you perform recording
or snapshot.
Cleaning
Before cleaning, turn off the camcorder and remove the battery pack and AC adapter.
To clean the camcorder
Wipe the camcorder gently with a soft cloth. If the camcorder is particularly dirty, dip the cloth
into diluted mild soap and wring it out well. After wiping with the wet cloth, wipe again with a
dry cloth.
To clean the LCD monitor
Wipe the monitor gently with a soft cloth. Be careful not to damage the monitor.
To clean the lens
Wipe gently with lens cleaning paper.
NOTE
•
Avoid using strong cleaning agents such as benzine or alcohol.
•
Mold may form if the lens is left dirty.
•
When using a cleaner or chemically treated cloth, refer to the cautions for each product.
47
ENGLISH
FURTHER
INFORMATION