Filter
Top Products
1
Touch MENU.
2
Select the desired menu.
REGISTER EVENT
VIDEO QUALITY
ZOOM
DIS
IMAGE BLURRED NEED TO
ON
VIDEO
SET
QUIT
Changing the Menu Settings
FURTHER INFORMATION
3
Select the desired setting.
REGISTER EVENT
VIDEO QUALITY
ZOOM
DIS
IMAGE BLURRED NEED TO
ON
RE
G
I
S
TER EVEN
T
V
IDE
O
Q
UALITY
ZOO
M
DI
S
I
MA
G
E BLURRED NEED T
O
O
N
VIDEO
OFF
ON
SET
QUIT
To return to the previous screen
Select
@
.
To quit the screen
Select [QUIT].
Troubleshooting
Trouble Action
Card
Cannot insert the SD
card.
•
Check that the SD card is facing the right direction.
Power
No power is supplied.
•
Connect the AC adapter correctly.
•
Recharge the battery.
Recording
Recording cannot be
performed.
•
SD card is full. Delete unnecessary files or replace the SD card.
Recording stops by
itself.
•
Insert a commercially available SD card, and set each of the
[VIDEO SLOT SELECTION] and [IMAGE SLOT SELECTION] to
[SLOT A] or [SLOT B].
•
Recording stops automatically after 12 hours of non-stop
recording. To ensure continuous recording, set [AUTO SWITCH
REC MEDIA] to [ON] before you start recording.
Vertical lines appear on
recorded images.
•
Such a phenomenon occurs when shooting a subject
illuminated by bright light. This is not a malfunction.
Before requesting service, consult the
following chart. If the solutions indicated in the
chart do not solve the problem, consult your
nearest JVC dealer or JVC service center for
instructions.
Refer also to the FAQ of new products on
JVC’s website.
The following phenomena are not
malfunctions.
•
The camcorder heats up when it is used for
a long time.
•
The battery heats up during charging.
•
When playing back a video, the image stops
momentarily or the sound is interrupted at
junctions between scenes.
•
LCD monitor momentarily become red or
black when sunlight is recorded.
•
Black spots, or red, green, or blue spots
appear on the LCD monitor.
(The LCD monitor contains 99.99% effective
pixels, but 0.01% of fewer pixels may be
ineffective.)
MENU SETTINGS
44