Filter
Top Products
26
MENU SETTING
Menu tree
The menu screens are structured as shown below.
VIDEOADJUST..
FOCUS ADJUST..
CAMERA SETT NGSI..
FACT
EXIT
ORY SETT NGSI..
MENU
WDR
AGC
COLOR LEVEL
ENHANCE
EXIT
EXIT
LEVEL
MODE
MODE
JUSTADVIDEO
2DMO
LOW
AT
E
MODE
JUSTADFOCUS
FOF
W
NO MALR
NO MALR
LENS
CAM T IT LE OFF
CAMERA ISETT NGS
E
CAM T IT LE EDITE
RA
RA
ADJUST ..
WDR
— — WDR CUSTOM SETTINGS — —
— —
MANUAL WHITE BALANCE — —
BI SA
EXP. BI SA
EXIT
–36 36
–
–
–
18 184
8
R–B
EX TI
BLUE RED
DOFFS
LENS ADJUST
ET
120100 150
C
C
ANC
FACTORY SETTINGS
EL
CLEAR
WDR L TIIM
0536
2
WH I ET BALANCE
WDR B TRGHI
010 4 510
01
EXIT
DGIAN
600255
C
Normal screen
EXIT
VPHASE
840104
੬ Page 27
੬ Page 28
੬ Page 35
੬ Page 29
੬ Page 34
੬ Page 35
੬ Page 39
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
— — —
Memo
● When selecting an item with “..” at the end, the submenu screen
will appear.
● When selecting EXIT in each screen, the screen will return to
the previous screen.
When selecting EXIT in the MENU screen, the screen will return
to the normal screen.
27
About menus
FOCUS ADJUST............Used during focus adjustment of the auto iris
lens.
(੬ Page 27)
VIDEO ADJUST ............. Sets the wide dynamic range, gain, color tem-
perature, white balance, etc.
(੬ Page 28)
CAMERA SETTINGS.....Sets the DC iris, camera title and vertical
phase.
(੬ Page 35)
FACTORY SETTINGS ... Restores the menu settings to the factory set-
tings.
(੬ Page 39)
FOCUS ADJUST screen
MODE Default setting: OFF
Used during focus adjustment of the auto iris lens.
When set to ON, the focus adjustment accuracy is increased by forcing
the iris open and with a shallower focal point.
Memo
When exiting the FOCUS ADJUST screen, MODE will automati-
cally be set to OFF.
28
MENU SETTING
VIDEO ADJUST screen
WDR MODE Default setting: MODE2
Setting of the wide dynamic range (WDR) is performed.
CUSTOM : Manually adjusts the wide dynamic range.
Pressing the SET button will display the WDR CUSTOM
SETTINGS screen. (੬ Page 30)
MODE1 : When shooting in a bright area outdoors
MODE2 : Standard video
MODE3 : To brighten the video taken indoors
MODE4 : To brighten areas with little luminance in video with large
difference in brightness
(When moving from dark indoors to outdoors during shoot-
ing)
FLUOR : For video taken under lighting (fluorescent lighting, etc.)
that synchronizes with commercial electrical power supply
frequency resulting in periodical change in colors
(When in a 60Hz area, set to LL (Line Lock).)
(੬ Pages 11, 36)
Memo
● The Wide Dynamic Range feature controls the exposure time
using up to 5 sampling timing within a single screen according
to the brightness of the subject. With the Wide Dynamic Range
feature, the subject with a large difference in brightness with the
remainder of the screen can be viewed in a clear, natural state
even when shooting in areas with large difference in lighting
(such as indoors easily influenced by backlight, afternoon sun,
etc., entrances and near windows).
● Set the mode by first checking under the usage environment.
29
1.
Display the VIDEO ADJUST
screen. (੬ Page 24)
2.
Select WDR MODE and press the
SELECTOR button in the horizon-
tal direction (8 or t) to change
the setting to CUSTOM.
3.
Press the SET button.
● The WDR CUSTOM SET-
TINGS screen will appear.
4.
Press the SELECTOR button in
the vertical direction (6 or 7) and
move the cursor (>) to the item to
set.
5.
Press the SELECTOR button in
the horizontal direction (8 or t)
to change the set value.
6.
To exit setting, select EXIT and
press the SET button.
● The screen returns to the
VIDEO ADJUST screen.
WDR CUSTOM SETTINGS screen
The Wide Dynamic Range (WDR) is adjusted manually.
Cursor Set value
WDR
AGC
COLOR LEVEL
ENHANCE
EXIT
LEVEL
MODE
MODE
JUSTADV— — — — — —IDEO
M..OSCU
LOW
AT
T
W
NO MALR
NO MALR
WHI ET BALANCE
WDR B I SA
EXP. BI SA
EXIT
–36 –8 36
–
–
18 184
WDR L TIIM
0536
2
WDR B TRGHI
010 4 510
0
1
——WDR CUSTOM SETTINGS — —
Memo
● WDR custom mode allows manual adjustment. (These are over-
written if other modes are selected.)
● When exiting the WDR CUSTOM SETTINGS screen without
changing settings, MODE1 will be automatically selected for
WDR MODE.
Operation