Filter
Top Products
14
Menu
SHOOTING ASSIST Menu Screen
Settings in bold are factory default settings.
Menu screen content
(continued)
Item Setting ValueDescription
FOCUS ASSIST RED
GREEN
BLUE
This item sets the display color of the focus section when the FOCUS ASSIST
function is operated.
RED : Displays the focus section in red.
GREEN : Displays the focus section in green.
BLUE : Displays the focus section in blue.
Note：
● When connected to GY-HD250U and [VF SIGNAL] is set to ARGBB at the
camera LCD/VF MENU screen, set FOCUS ASSIST at the camera to
AOFFB. Settings at VF will be invalid.
LEVEL LOW
MIDDLE
HIGH
This item sets the focus level during the FOCUS ASSIST operation.
LOW : Displays the focus section.
MIDDLE : Emphasizes the focus section.
HIGH : Further emphasizes the focus section.
ZEBRA OVER
1PAT TER N
2PAT TER NS
Select whether to display Zebra and the display format.
OFF : Does not display Zebra.
1PATTERN : Displays the brightness set between [TOP1] and [BOTTOM1] in
Zebra.
2PATTERNS :
In addition to [1PATTERN], this displays the brightness set
between [TOP2] and [BOTTOM2] in Zebra.
TOP1 5 % ~ 80 % ~ 100 %
OVER
This item sets the upper limit of the brightness of Zebra 1.
5 %
~
100 %
: Displays the brightness below this setting as Zebra. (The value
can be set in intervals of 5 %.)
OVER : Cancels the upper limit of the brightness of the displayed Zebra.
Note：
●
When [ZEBRA] is set to
A
OFF
B
, [----] will be displayed and setting is disabled.
BOTTOM1 0 % ~ 70 % ~ 100 % This item sets the lower limit of the brightness of Zebra 1.
0 % ~ 100 %: Displays the brightness above this setting as Zebra. (The value
can be set in intervals of 5 %.)
Note：
●
When [ZEBRA] is set to
A
OFF
B
, [----] will be displayed and setting is disabled.
TOP2 5 % ~ 100 %
OVER
This item sets the upper limit of the brightness of Zebra 2.
5 % ~ 100 % : Displays the brightness below this setting as Zebra. (The value
can be set in intervals of 5 %.)
OVER : Cancels the upper limit of the brightness of the displayed Zebra.
Note：
● When [ZEBRA] is set to AOFFB or A1PATT ERN B, [----] will be displayed and
setting is disabled.
BOTTOM2 0 % ~ 80 % ~ 100 % This item sets the lower limit of the brightness of Zebra 2.
0 % ~ 100 % : Displays the brightness above this setting as Zebra. (The value
can be set in intervals of 5 %.)
Note：
● When [ZEBRA] is set to AOFFB or A1PATT ERN B, [----] will be displayed and
setting is disabled.
PEAKING FREQ. LOW
MIDDLE
HIGH
This item sets the frequency band where the contour is emphasized with the
[PEAKING] control.
LOW : Emphasizes the low frequency band.
MIDDLE : Emphasizes the intermediate frequency band.
HIGH : Emphasizes the high frequency band.
PAGE BACK ^ This returns to the [MAIN MENU] screen.
VF-HP840U_EN.book Page 14 Thursday, January 17, 2008 2:48 PM