Filter
Top Products
14
Connection / Installation
Electricity can be supplied to this product either
by using the PoE or connecting to the AC 24 V
power supply.
ⅷ When power is supplied to this product, the
[STATUS] indicator at the side lights up. The
indicator lights up in orange color during
startup, and switches to green color after
startup is complete.
Caution:
● Make sure to select only one mode of
electrical supply. Connecting the power cord
and the LAN cable for the PoE at the same
time may result in failure or malfunction of the
camera.
● Be sure to use an AC 24 V supply that is
isolated from the primary power supply
circuit. Using a variable voltage power supply
will cause the camera and system to
malfunction or breakdown.
Using the PoE
Connect to a device that supports PoE to supply
electricity from the LAN cable.
Note:
● For details on the connection method and
cable type, please refer to ALAN Cable
ConnectionB (A Page 16).
Power Connection
CAUTION
:NEVERUSE
PoE
AND
AC24V
ATTHE SAMETIME
DONOTCONNECT TOTHETELEPHONE NETWORK
SEEINSTRUCTIONMANUAL
CLASS2ONLYFORUSA
ISOLATEDPOWERONLY
FOREUROPEANDOTHER
MONITOR
OUT
10BASE-T/
100BASE-TX
PUSH
OUTPUT
INPUT
2
AC24V
1
PoE
G 2121
ALARM
Connect to PoE-
compatible device
What is PoE (Power over Ethernet)?
This is a function that enables operation of a
LAN equipment without a power cable by
supplying power simultaneously with the data
using a LAN cable.
STATUS
MONITOROUT
IRIS
PAL OFF NTSC
RESET
Status Indicator
VN-V25U_EN.book Page 14 Friday, November 2, 2007 11:26 PM