Filter
Top Products
57
Protocol Page
This page is for changing the HTTP server port number.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings.
● After changing, you will need to re-establish the connection if you are using the Internet Explorer.
Note:
● If the built-in viewer is used for playback, change the HTTP port number in the setting screen of the
built-in viewer to the same value.
A HTTP Server
Port
You can change the port number for the built-in web server of VN-V25U.
(1 ~ 65535: The default port number setting is 80.)
The JPEG and MPEG4 HTTP port number for the web server will also be
changed.
During access to VN-V25U from the Internet Explorer, enter the following in
the Internet Explorer when the camera is in its default settings.
http://192.168.0.2
If the port number is changed to 8080, for example, enter the Internet
Explorer as follows.
http://192.168.0.2:8080
A
VN-V25U_EN.book Page 57 Friday, November 2, 2007 11:26 PM