Filter
Top Products
Troubleshooting
www.kodak.com/go/support
43
Wireless network connection
Status lights
Problem Cause and/or solution
Photo printer cannot
connect to the network
■ A Kodak Wi-Fi card is not inserted or is not fully inserted. Reinsert
the Wi-Fi card (page 29).
■ Check the power connections.
■ Make sure the wireless router and network are running before
the photo printer begins scanning for a network.
■ Out of range of the Wi-Fi signal. Make sure the photo printer is
located within the operating range of the Wi-Fi wireless network.
■ The photo printer network settings are incorrect. Using the Wi-Fi
wireless configuration utility on your computer, change the
settings to match those of the network.
See the Wi-Fi wireless configuration utility Help for details.
■ There is interference in the wireless signal (such as a microwave
oven). Wait until there is no interference, then try again.
Print button/light
Light status Cause Action/solution
Light glows steady
green
The photo printer is ready for
printing.
None required.
Light blinks green The photo printer is printing.