Filter
Top Products
Taking pictures and videos
16
Putting yourself in the picture
The Self Timer creates a 10-second delay between the time you press the
Shutter button and the time the picture is taken.
1 Place the camera on a flat surface or tripod.
2 In any Still mode, press the Self Timer button .
The Self Timer icon appears in the status area.
3 Compose the scene. Then press the Shutter button halfway and hold to
set the exposure and focus, then press the rest of the way down. Move
so that you are in the scene.
The Self Timer light blinks slowly for 8 seconds (then quickly for 2 seconds)
before the picture is taken. The Self Timer turns off after you take the picture or
if you change modes.
To cancel the Self Timer before the picture is taken, press the Self Timer
button. (The Self Timer setting remains active.)
To turn off the Self Timer, press the Self Timer button twice.
Putting yourself in the video
1 Place the camera on a flat surface or tripod.
2 Turn the Mode dial to Video , then press the Self Timer button .
3 Compose the scene, then press the Shutter button completely down. Move
so that you are in the scene.
NOTE: The default video length is Unlimited. The video will stop when you press the Shutter
button or when no storage space remains. To change the video length, see
Video Length,
page 21.