Filter
Top Products
7
Chapter 1
Turning On the Camera
Turn the Mode dial from Off to any other
position.
The Power light glows green.
The ready light blinks while the camera
performs a self-check, then glows green
when the camera is ready to take pictures
(or videos, if the mode dial is set to ).
In Still and Video modes, a status bar
appears on the LCD.
Adjusting the Display
Ready
Mode
Power
dial light
light
OK
To Do This
Turn Liveview on so that the
LCD can be used as a viewfinder
Press the OK button. To turn it off, press
the OK button again.
Change the Liveview setting
so that it is on whenever the
camera is on
See page 57.
Turn the status bar back on
after it times out
Move the joystick .
Turn off the camera Turn the Mode dial to Off.
The camera completes operations that
are in process.