Filter
Top Products
58
Chapter 6
Turning Off the Low Light Auto Focus LED
You can prevent the Low Light Auto Focus LED (page 14) from firing.
NOTE: When the Low Light Auto Focus LED is off, the camera may not perform
as well in low light.
1 Press the Menu button.
2 Move the joystick to highlight Setup , then press the OK button.
3 Move the joystick to highlight Low Light
Auto Focus LED , then press the OK
button.
4 Move the joystick to highlight Off, then press
the OK button.
5 Press the Menu button to exit the menu.
This setting remains until you change it.
Setting Video Out
Video Out must be set correctly to run a slide show on a television or other
external device (see page 47).
1 Press the Menu button.
2 Move the joystick to highlight Setup , then press the OK button.
3 Move the joystick to highlight Video Out , then press the OK button.
4 Move the joystick to highlight an option:
NTSC—used in most countries except
those in Europe and China. The United
States and Japan use NTSC.
PAL—used in Europe and China.
5 Press the OK button to accept the change.
6 Press the Menu button to exit the menu.
This setting remains until you change it.