Filter
Top Products
10
Chapter 1
Inserting an MMC/SD Card
Optional MMC/SD cards provide removable, reusable storage for pictures and
videos.
CAUTION:
The card can only be inserted one way; forcing it may
damage the camera or card.
Do not insert or remove a card when the green ready light
is blinking; doing so may damage your pictures, card, or
camera.
To insert an MMC/SD card:
1 Turn off the camera.
2 Open the card door.
3 Orient the card as shown on the card door.
4 Push the card into the slot to seat the
connector. (To remove the card, turn off
the camera. Push the card in, then release
it. When the card is partially ejected, pull it
out.)
5 Close the door.
See page 97 for storage capacities. Purchase accessories at your KODAK retail
dealer or http://www.kodak.com/go/accessories.
Notched
corner
of card