Filter
Top Products
37
3 Taking Videos
Use the Video setting to take videos or to customize video-taking settings.
Before you take a video, make sure your picture storage location is set the way
you want it (see page 11).
NOTE: Flash is not available in Video mode. You can change Optical Zoom
before (but not during) video recording.
Taking a Video
1 Turn the Mode dial to Video .
A live image, the status bar, and the
recording time available appear on the
LCD.
2 Use the viewfinder or LCD to frame your
subject.
NOTE: To conserve battery power, press the OK
button to turn off the LCD.
3 Press the Shutter button completely down and release within 2 seconds.
The ready light blinks green while the camera is recording. Recording
stops when you press the Shutter button again or when the current
storage location is full.
NOTE: If you prefer, you can press and hold the Shutter button completely
down for more than 2 seconds to record. Release the Shutter button to
stop recording.
See page 97 for video storage capacities.