Filter
Top Products
27
Chapter 2
Setting Exposure Compensation
Use Exposure Compensation to control how much light enters the camera. This
setting is useful for taking pictures in very large rooms, under low light,
without a flash.
Adjust the exposure by plus or minus 2 steps in 1/2-step increments.
NOTE: Exposure Compensation cannot be used with Long Time Exposure.
1 In any Still mode, press the Menu button.
2 Move the joystick to highlight Exposure Compensation , then
press the OK button.
3 Move the joystick to select the
Exposure Compensation setting.
m If pictures are too light, decrease the
value.
m If pictures are too dark, increase the
value.
4 Press the OK button to accept the change.
5 Press the Menu button to exit the menu.
6 Use the LCD to frame your subject. Press the
Shutter button half-way to set the focus,
then continue pressing completely down
to take the picture.
This setting remains until you move the
Mode dial or turn off the camera.