Filter
Top Products
78
Chapter 9
Picture is not
clear.
The lens is dirty. Clean the lens (page 96).
Subject too close when
taking picture.
Move so there is at least 2.0 ft (0.6
m) between the camera and the
subject, or at least 0.5 ft (15.2
cm) in Close-up mode.
Subject or the camera
moved while the
picture was taken.
Hold the camera steady while
taking the picture.
The subject is too far
away for the flash to be
effective.
Move so there is no more than
10.8 ft (3.3 m) between the
camera and the subject; 6.2 ft
(1.9 m) in Telephoto.
Slide show does
not run on
external video
device.
Video Out setting is
incorrect.
Adjust the camera Video Out
setting (NTSC or PAL,
page 58).
External device is set
incorrectly.
Refer to the external device’s
user’s guide.
Camera freezes
up when a card is
inserted or
removed.
Camera detects an
error when the card
was inserted or
removed.
Turn the camera off, then back
on. Make sure the camera is
turned off before inserting or
removing a card.
Camera
Problem Cause Solution