Filter
Top Products
20
Chapter 2
Using the Auto Focus Framing Marks
For the best possible pictures, the camera attempts to focus on foreground
subjects (even if the subjects are not centered in the scene).
NOTE: Auto Focus framing marks appear only when the LCD is turned on.
Framing marks do not appear in Landscape mode. When the focus is set
to Center Zone, focus is fixed at Center wide (see page 32).
1 In any Still mode (except Landscape), press the OK button.
The LCD turns on.
2 Press the Shutter button half-way to set the exposure and focus.
3 The Auto Focus framing marks depict the main focus area or areas. If the
camera is not focusing on the desired subject (or if the framing marks
disappear), release your finger, recompose the scene, and repeat Step 2.
When the framing marks turn red, focus is accomplished.
4 Continue pressing the Shutter button completely down to take the
picture.
While Shutter Button is Pressed Half-way
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus