Filter
Top Products
Flash Photography
April 29, 2004 10-3
Using the Built-in
Speedlight
Follow these instructions when using a G-type or D-type AF NIKKOR lens.
NOTE: Continuous Shooting Drive mode cannot be used in flash
photography.
1. Set the Metering system to Matrix or Center-Weighted metering (
see page 7-8).
2. Press the Flash Lock-Release button to release the Built-In Speedlight.
The Speedlight starts to charge when it is released. appears in the
viewfinder when it is fully charged.
NOTE: To conserve power when the Speedlight is not in use, close it by
pressing the Speedlight down gently until it clicks in place.
3. Press and hold and rotate the Main-Command dial to set the
Flash Sync mode.
4. Set the Exposure mode (see page 7-10) and confirm shutter speed
and aperture.
NOTE: Automatic Balanced Fill-Flash for Digital SLR is executed when you
set Exposure mode to Programmed Auto, Shutter-Priority Auto, or
Aperture-Priority Auto. Standard TTL Flash for Digital SLR is
executed when you set Exposure mode to Manual.