Kodak DCS Pro SLR/n Digital Camera User Manual


 
10-14 April 29, 2004
Flash Photography
You can use the following Speedlights in non-TTL auto and manual modes.
If they are set to TTL, the camera shutter-release button locks and no
images can be captured.
Flash mode A M REAR
Speedlight Non-TTL
auto
Manual Repeating
flash
Rear-
curtain
sync
Red-eye
reduction
SB-28./SB-26
1
✓✓
SB-27
2
✓✓
SB-25/SB-24 ✓✓
SB-23
3
/SB-29
4
/
SB-21B
3, 4
✓✓
SB-30/SB-22S/SB-22/
SB-20/SB-16B/SB-15
✓✓
SB-11
5
/SB-14
5
✓✓
1 The SB-26 can be set to slave mode for wireless slave flash photography. When the wireless
slave selector is set to D, shutter speed is set to under 1/90 S.
2 When an SB-27 is mounted on the DCS Pro SLR/n, the flash mode is automatically set to TTL,
and the shutter-release is disabled. Set the SB-27 to A (non-TTL auto flash).
3 Manual mode only. Use is not recommended.
4 Autofocus is only available with AF-Micro lenses (60 mm, 105 mm, 200 mm, or 70-180 mm).
5 When using the SB-11 or SB-14 in A or M mode, use the SU-2 with an SC-13 sync cable.
Although SC-11 and SC-15 sync cables can be used, the flash-ready indicator will not appear in
the viewfinder and shutter speed will not be adjusted automatically.