Filter
Top Products
Taking pictures and videos
6 www.kodak.com/go/support
Reviewing the picture or video just taken
After you take a picture or video, the camera screen or EVF displays a
Quickview for approximately 5 seconds.
To view pictures and videos anytime, see page 9.
Using the auto-focus framing marks (pictures)
When using the camera screen or EVF as a viewfinder, framing marks indicate
the camera focus area. The camera attempts to focus on foreground subjects,
even if the subjects are not centered in the scene.
1 Press the Shutter button halfway.
When the framing marks turn green, focus is accomplished.
2 If the camera is not focusing on the desired subject (or if the framing marks
disappear), release the Shutter button and recompose the scene.
3 Press the Shutter button completely down to take the picture.
NOTE: Framing marks do not appear in Landscape or Video mode. When you use Focus
Zone (page 28) and set Center Zone, the framing marks are fixed at Center Wide.
While the shutter button is pressed halfway:
Center focus
Center wide focus
Side focus
Center and side focus
Left and right focus
If you press
no buttons, the
picture/video is
saved.
Tag a picture/video for
email or as a favorite, or
to tag a picture for print.
Play a video.
( to adjust volume.)
Delete
Framing marks