Filter
Top Products
Doing more with your camera
www.kodak.com/go/support
29
AF Control
Choose an auto-focus setting.
This setting remains until you
change it.
Continuous AF (default)—uses external
AF sensor and TTL-AF (Through-The-Lens).
Because the camera is always focusing,
there is no need to press the Shutter button
halfway down to focus.
Single AF —uses external AF sensor
and TTL-AF when the Shutter button is
pressed halfway down.
Color Mode
Choose color tones.
This setting remains until you
turn the Mode dial or turn off
the camera.
High Color
Natural Color (default)
Low Color
Black & White
Sepia—for pictures with a reddish-brown,
antique look.
NOTE: EasyShare software also lets you change a
color picture to black-and-white or sepia.
Unavailable in Video mode.
Sharpness
Control picture sharpness.
This setting remains until you
change it.
High
Normal (default)
Low
Available only in PASM mode.
Reset to Default
Reset all picture-taking
settings to the defaults.
Reset
P, A, S, or M
mode to its default setting.
Available only in PASM mode.
Set Album
Choose Album names.
This setting remains until you
change it. You can apply
different Set Album choices to
videos and to pictures.
On or Off.
Pre-select album names before you take
pictures or videos. Then, all the pictures or
videos you take are tagged with those album
names. See page 35.
Image Storage
Choose a storage location for
pictures and videos.
This setting remains until you
change it.
Auto (default)—the camera uses the card
if one is in the camera. If not, the camera
uses internal memory.
Internal Memory—the camera always
uses internal memory, even if a card is
installed.
Setting Icon Options