Filter
Top Products
Troubleshooting
www.kodak.com/go/support
43
Picture quality problems
Pictures do not
transfer to computer
■ Click the Help button in the EasyShare software.
Slide Show does not
run on an external
video device
■ Adjust the camera Video Out setting (NTSC or PAL,
page 31).
■ Make sure the external device settings are correct (see the
device’s user’s guide).
If... Try one or more of the following
Picture is too dark
or underexposed
■ Reposition camera for more available light.
■ Use Fill flash (page 22) or change your position so light is not
behind the subject.
■ Move so that the distance between you and the subject is
within the effective flash range (page 9).
■ To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■ Adjust exposure compensation (page 33).
Picture is too light
■ Reposition camera to reduce the amount of available light.
■ Turn flash off (page 22).
■ Move so that the distance between you and the subject is
within the effective flash range (page 9).
■ To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■ Use P mode to adjust the Exposure.
Picture is not clear
■ To automatically set exposure and focus, press the Shutter
button halfway. When the AF/AE indicator turns green, press
the Shutter button completely down to take the picture.
■ Clean the lens (page 55).
■ Make sure camera is not in Close-up mode if you are more
than 21 in. (0.7 m) from your subject.
■ Place the camera on a flat, steady surface or use a tripod,
especially in high-zoom settings or in low light.
If... Try one or more of the following