Filter
Top Products
105
The driver needs only to be installed once. If the driver cannot be installed automatically,
it can be installed manually with the operating system’s add-new-hardware wizard; see
the instructions on the following page. During installation, if the operating system
requests the Windows 98 CD-ROM, insert it into the CD-ROM drive and follow the
accompanying instructions on the screen. No special driver software is required for other
Windows or Macintosh operating systems.
CONNECTING TO WINDOWS 98 AND 98 SE
Before connecting the camera to the
computer, place the DiMAGE Viewer CD-
ROM in the CD-ROM drive. The DiMAGE
installer menu should automatically
activate. To automatically install the
Windows 98 USB driver, click on the
starting-up-the-USB-device-driver-installer
button. A window appears to confirm that
the driver should be installed; click “Yes” to
continue.
When the driver has been successfully
installed, a window appears. Click “OK.”
Restart the computer and connect the
camera (p. 103) to complete the operation.
Automatic Installation