Camera notes
17
TURNING ON THE CAMERA AND DISPLAYS
Press the main switch to turn the camera on. Pressing the switch again
turns the camera off.
When the camera is turned on, the Anti-shake indicator
appears on the LCD monitor.
The mode switch, next to the main switch, is used to change between
the recording and playback modes as well as the selecting the
between the monitor and viewfinder display.
Recording mode (Monitor display) - the camera can record
images and the monitor is viewed directly.
Recording mode (Viewfinder display) - the camera can
record images and the monitor is viewed through the
viewfinder. The viewfinder has a built-in diopter. While looking
through the viewfinder, turn the diopter-adjustment dial until the
monitor image is sharp.
2
1
Playback mode (Monitor display) - images can be played
back and edited. The monitor is viewed directly.
To use the viewfinder in the playback mode, press and hold
the flash mode button (1) and then press and hold the
information (i
+
) button (2) until the monitor switches to the
viewfinder position.